.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
Very Strange Dynamips Problem
Hi GS:
Thanks for your help. But, I just had to shut down BOTH interfaces, and let sit for about 30 seconds. Then it came back up and worked perfectly. Thanks for everybody’s help!
On Sat, Apr 5, 2008 at 5:09 PM, Peter wrote:
> It happens lot of times to me as well, specially when setting up the lab > at > the beginning. > I save configs and reload both, it works. > > If anyone has solution for this u’re more than welcome! > > Cheers, > Peter > —–Original Message—– > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of > Matt > Bentley > Sent: Saturday, April 05, 2008 22:54 > To: Cisco certification > Subject: Very Strange Dynamips Problem > > Hi GS: > > Wondering if anyone else has had similar issues with dynamips. I have R1 > Fa0/0 directly connected to SW1 Fa1/1. Show cdp neighbors verifies this. > I > get an encapsulation failed message when I try to ping R1 from SW1. R1 > has > a ARP entry for SW1, but SW1 does not have an entry for R1. I have hard > coded the speed and duplex settings to 100MBPS full duplex, still nothing. > What am I doing wrong? Like I say, if anyone else has had similar issues > with dynamips, I would appreciate your help. Thanks very much in advance. > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
