Strange VTP issue with vtp transparent

March 31, 2008 @ 2:09 am · Filed under CCIE Study

Sorry, I wrote by mistake, any way its blocking. All switches had the revision of 0. So why when I change the SW2 from transparent to client all the switches getting updated.

—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Joseph Brunner Sent: Monday, March 31, 2008 11:25 AM To: ‘Reza Toghraee’; ccielab@groupstudy.com Subject: RE: Strange VTP issue with vtp transparent
How can a port be desg, blocking?
Its desg, fwd, or alt, blocking.
I suspect you are having an issue tracking the config revision number in use. In your lab based on the roles you describe sw1 (server) will always be able to update the client (STP ROOT) unless the client has a later config revision number.
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Reza Toghraee Sent: Monday, March 31, 2008 1:05 AM To: ccielab@groupstudy.com Subject: Strange VTP issue with vtp transparent
Hi

I found that the VTP server only sends the VTP packets over its SPT designated ports not through the root port.
I have 4 switches, a ring topology

SW1 is VTP server
SW2 is VTP Transparent
SW3 is VTP Client , STP Root
SW4 is VTP Client
All are same VTP domain CISCO

When I create vlan 2 on SW1, it will not affect other switches. (SW2, SW3, SW4 still have original vlan database)
When I change the SW2 to VTP client, VTP propagates.
So this means that SW1 is not sending its VTP packets through the SPT root port.

Any comment will help.

Regards
Reza Toghraee

Bookmark this post:These icons link to social bookmarking sites where readers can share and discover new web pages.