.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
Static or Dynamip RP or anyone is ok?
Do both solutions meet the requirements? If they do the answer if yes 
Look at it this way. They don’t grade your “solution” they grade to see if you met the requirements.
HTH,
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP) bdennis@internetworkexpert.com
Internetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987 Direct: +1-775-544-1653 (Outside the US and Canada)
>—– Original Message —– Subject: Static or Dynamip RP or anyone is ok? Date: Tue, January 22, 2008 4:55 From: “dave dave”
> Hi, > > If task says use most reliable interface on R2 as RP & use pim sparse mode > only. > > Below is the answer > > 1. Static RP as lookback interface of R2 or > 2. Dynamic RP & mapping agent as R2 lookback interface with auto rp > listner > > Are both answer ok? > > Regards > Dave > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
