.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
SRST router command bug
Hi Guys,
I have just noticed during labbing that when SRST kicks in , the ” isdn bind-l3 ccm-manager” command disappear from the ISDN D channel interface. interface Serial0/2/0:23 description — ISDN d channel — no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bind-l3 ccm-manager isdn bchan-number-order ascending no cdp enable end
D controller, logs during sRST Dec 26 11:25:49.510: %LINK-3-UPDOWN: Interface Serial0/2/1:23, changed state to up Dec 26 11:25:49.510: %LINK-3-UPDOWN: Interface Serial0/2/1:0, changed state to down Dec 26 11:25:49.510: %LINK-3-UPDOWN: Interface Serial0/2/1:1, changed state to down Dec 26 11:25:49.510: %LINK-3-UPDOWN: Interface Serial0/2/1:2, changed state to down
And noticed that the L3 backhauling command disappread:
interface Serial0/2/0:23 description — ISDN d channel — no ip address encapsulation hdlc isdn switch-type primary-ni isdn incoming-voice voice isdn bchan-number-order ascending no cdp enable end
When I dialed the phone number of HQ site It couldn’t went thorugh, here are the logs:
Plan:Unknown, Type:Unknown RELEASE pd = 8 callref = 0×0094 Dec 26 11:30:37.375: ISDN Se0/2/1:23 Q931: RX
