.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
cisco t-1 bridge config
Hi,
You are configuring a layer 3 etherchannel. If you type the "channel-group 14 mode desirable" command before the "no switchport", the port-channel don't come up.
Regards
------------------------- Jose A. ...
That is odd. If memory serves me right, back when Scott was still an IPExpert and had problem with that British voice guy, I couldn't configured the same autonomous-system 1 under both address-family ipv4 vrf CE1 and CE2...but now it lets me :) By redistribution I meant I have to use this stand alone BGP session to do the redistribution between them. ...
This topic confused me also. And I was confused because the storm control behavior depends whether it is a 3550 or 3560. ...
I have configured OSPF with MD5 but there is irritating debug coming in every second...
OSPF: Send with youngest Key 1 OSPF: Send with youngest Key 1 OSPF: Send with youngest Key 1
follwoing my config on both sides R4 and R5
interface Serial0/1/0 ip address 136.1.45.4 255.255.255.0 encapsulation ppp ip ospf authentication message-digest ip ospf message-digest-key 1 md5 cisco ip ospf cost 9999 ppp authentication pap ppp pap sent-username R4 password ...
...the Internet (user) to connect to the data systems whether it be a T-1, ISDN phone connection, or ... CISCO, Apple, and many other companies...