Go CCIE Go!! - A Cisco Certified Internetwork Expert

Does anyone have a link to the exact rules to do conditional default injection via rip with default-information originate route-map? Send a default out s3 if e1 and e2 are down, the only way I can get it to work (not using obj tracking/rtr/sla monitor): e1 1.1.1.0/24 e2 2.2.2.0/24 s3 3.3.3.0/24 e1 s3 [R1] e2 access-list 1 permit 1.1.1.0 0.0.0.255 access-list 2 permit 2.2.2.0 0.0.0.255 access-list 3 permit 3.3.3.0 0.0.0.255 route-map COND permit 10 match ip add 1 set int null0 route-map COND permit 20 match ip add 2 set int null0 route-map COND permit 30 match ip add 3 set int s3 From what I can tell (c3640-jk9o3s-mz.123-10.bin): route-map COND permit 30 must have an explicit match to an access-list that matches a route in the routing table, relying on the implicit match dosent work, I started to go insane trying to figure this out. ...

I was looking at this today, ..... in order to overcome the problem of locally generated traffic not being "reflected", you could policy route that traffic. e.g. ip local policy-map XYZ route-map XYZ match interface loopback 0 that will use lo ...

Besides the *confederation*, here are some choices: Let's say you have R1 in AS 100 and R2 in AS 200. ...

...map .. next ok that is general sense of the question ... but it is behaving differently for different set of rules .. how does it allow / deny...

...route-map UPDATES-2 permit 20 ... match ip address 2 ... set weight 100 ... access-list 1 permit 10.1.2.0 0.0.0.255 ... access-list 2 deny...

...to use IP SLAs with policy-based routing to force ... list 101 deny ip any 172.16.0.0 0.15.255.255 access-list 101 permit ip any any ! !

...to define the route map for Policy-based routing: routera(config)# route-map map-tag [permit | deny ... to use the Cisco IOS Policy-Based...

EIGRP routes in the routing table ... relay lmi-type cisco ! interface ... map block-aggregate deny 10 match ip address DenyAggregate ! route-map

Routing with Cisco 2500 and 1000 Series for LAN-ISDN Service ... route-map route-map information ... access-list 104 deny   ip 38.166.101.0

I`ve got a problem configuring a Cisco 837 with ... 3des esp-sha-hmac ! crypto dynamic-map SDM_DYNMAP ... deny ip host 0.0.0.0 any access-list

...ip inspect name FIREWALL cisco-fna ... ip inspect name FIREWALL msexch-routing ... crypto dynamic-map DYN_MAP 5 ... set transform-set SCRAMBLE

Cisco CCNP certification exam tutorial on filtering routing updates with ... no match community-list returns deny. ... filter using route-map can

0.0 0.0.0.0 fast ethernet 4" all routing on inside ... map CorpEZVPN-rm interface FastEthernet4 overload ! ip sla logging traps access-list 10 deny