bgp rib failure routes not advertised to peers
Got it. The difference is whether it can go someplace else or not (short answer). ...
Again thanks to everyone for your prompt reply. I couldn't make it work . I configured soft reconfig inbound on both sides but on BB3 it always give same error.. ...
Hi Martin, You probably have debug ip bgp enabled.
Regards, Ramiro G.
On 4/23/08, Martin Kiefer wrote: > > Hi all. ...
...r RIB-failure, S Stale. Origin codes: i - IGP, e - EGP, ? - incomplete ... Table, not advertised to EBGP peer) Advertised to non peer-group...
...updates between iBGP peers, it is not advertised to other (eBGP peers) AS'. ... r RIB-failure, S Stale
5.1 BGP Peering ... 5.2 BGP Route Reflection ... sure that these two VLANs are not advertised out ... r RIB-failure, S Stale
...requirements of BGP is that all IBGP peers MUST be fully meshed. This is not ... r RIB-failure, S Stale
...defines the next hop in the BGP path which ... 1 available, no best path) Not advertised to any ... valid, > best, i - internal, r...
...r RIB-failure, S Stale. Origin codes: i - IGP, e - EGP, ? - incomplete ... local BGP speaker's UPDATE messages and advertised to its ... peers.