.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
RSPAN QUESTION — Only for 3550
Tapas, Any “unused” port would be fine on switch A. On a 3550 switch, the reflector port command utilizes the buffers of a port to copy the traffic of the span port(source) onto the rspan vlan.
HTH, Tarun
On 2/15/08, Tapas Das wrote: > > I have 2 two 3550 Switches, one as a VTP server and other as VTP Client. > My RSPAN VLAN is 6 > > Switch A & Switch B are connected thru ports 1,2,3 & 4, configured as > ether-channel. (trunk port) > > port 10 on switch A is the source port > port 10 on switch B is the destination port > > When using the refelector-port command on Switch A, which port no. should > I > use. > > Thanx in advance. > > > _________________________________________________________________ > Post ads for free - to sell, rent or even buy.www.yello.in > http://ss1.richmedia.in/recurl.asp?pid=186 > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
