Go CCIE Go!! - A Cisco Certified Internetwork Expert

Option 1 is what you need. R3&R4 should be route-reflectors (where you configure route-reflector-client)
Option 2 does nothing.
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of 2008ccie@live.com Sent: Sunday, 1 June 2008 5:50 AM To: ccielab@groupstudy.com Subject: Route-Reflector-client
Hi experts here is my simple scenario I am confused in route-reflector-client. Can anyone explain me? which one is right?
|—–R3—–| R6—–R1 R2——–R5 |—–R4—–| R6—————AS 100 R1,R2,R3,R4 — AS 200 R5 —————AS 300
R6 router bgp 100 nei 10.0.0.1 remote-as 200
R1 router bgp 200 nei 10.0.0.6 remote-as 100 nei 20.0.0.3 remote-as 200 nei 20.0.0.4 remote-as 200 nei 20.0.0.2 remote-as 200
R3 router bgp 200 nei 20.0.0.1 remote-as 200 nei 20.0.0.2 remote-as 200
R4 router bgp 200 nei 20.0.0.1 remote-as 200 nei 20.0.0.2 remote-as 200
R2 router bgp 200 nei 30.0.0.5 remote-as 300 nei 20.0.0.3 remote-as 200 nei 20.0.0.4 remote-as 200 nei 20.0.0.1 remote-as 200
R5 router bgp 300 nei 30.0.0.2 remote-as 200

i am confusing in route-relector where i configure? option 1
R3 nei 20.0.0.1 route-reflector-client nei 20.0.0.2 route-reflector-client
R4 nei 20.0.0.1 route-reflector-client nei 20.0.0.2 route-reflector-client
or option 2
R1 nei 20.0.0.3 route-reflector-client nei 20.0.0.4 route-reflector-client
R2 nei 20.0.0.3 route-reflector-client nei 20.0.0.4 route-reflector-client
Regards