rip networks filtering

December 19, 2007 @ 11:09 am · Filed under CCIE Study

Hi, Just try it.

And you’ll seeL

From: Edison Ortiz [mailto:edisonmortiz@gmail.com] Sent: 19 dEKEMWRI 2007 G. 17:11 To: Lora Ganeva; ’shiran guez’ Cc: ccielab@groupstudy.com Subject: RE: rip networks filtering

No, that filters network 199.16.1.0-199.16.7.255 on the first ACL and 199.16.8.0-.255 on the second ACL - not just even networks.

Unless I misunderstood the requirement, that should cover it.

Edison Ortiz
Routing and Switching, CCIE # 17943
________________________________
From: Lora Ganeva [mailto:lganeva@mobiltel.bg] Sent: Wednesday, December 19, 2007 9:53 AM To: Edison Ortiz; shiran guez Cc: ccielab@groupstudy.com Subject: RE: rip networks filtering

This filters all even networksL

From: Edison Ortiz [mailto:edisonmortiz@gmail.com] Sent: 19 dEKEMWRI 2007 G. 16:43 To: Lora Ganeva; ’shiran guez’ Cc: ccielab@groupstudy.com Subject: RE: rip networks filtering

199.16.1.0 0.0.6.255
199.16.8.0 0.0.0.255

Edison Ortiz
Routing and Switching, CCIE # 17943
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Lora Ganeva Sent: Wednesday, December 19, 2007 8:44 AM To: shiran guez Cc: ccielab@groupstudy.com Subject: RE: rip networks filtering

Hi all,

But 199.16.1.0 0.0.7.255??? this is actually 199.16.0.0 0.0.7.255 and the zero
subnet has to be filtered.

BR,

Lora

From: shiran guez [mailto:shiranp3@gmail.com]
Sent: 19 dEKEMWRI 2007 G. 15:15
To: Lora Ganeva
Cc: ccielab@groupstudy.com
Subject: Re: rip networks filtering

my mistake didnt saw the range sign

Subodh given you the correct answer!

On Dec 19, 2007 2:11 PM, Lora Ganeva wrote:

Hi experts,

I am experiencing some problems with the following task:

Two routers , let’s say R1 and R2 are connected (media is not important,
let’s say it is Ethernet)

R1 Eth1/0—————150.1.1.0/24————- Eth1/0 R2

R1:

Eth1/0

Ip add 150.1.1.1 255.255.255.0

R2:

Eth1/0