Go CCIE Go!! - A Cisco Certified Internetwork Expert

That was the issue I brought up with my last reply. You could police/rate-limit traffic but you can’t reserve bandwidth.
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security) bdennis@internetworkexpert.com
Internetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987 Direct: 775-745-6404 (Outside the US and Canada)

From: James Nendel [mailto:james.nendel@gmail.com] Sent: Friday, August 25, 2006 11:23 PM To: Brian Dennis Cc: ccielab@groupstudy.com Subject: Re: QoS — SCOTT or the BRIANS
Thanks!
but how do I enable a minimum bandwidth reservation configuration, not to limit the traffic. Is that possible?
Rack3R3(config-pmap-c)#bandwidth 32
Class Based Weighted Fair Queueing will be applied only to the Virtual-Access interfaces associated with an MLP bundle. On 8/26/06, Brian Dennis wrote: Here is the interface’s configuration:
interface Serial1/0 no ip address encapsulation frame-relay ! interface Serial1/0.1 point-to-point frame-relay interface-dlci 301 ppp Virtual-Template1
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security) bdennis@internetworkexpert.com
Internetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987 Direct: 775-745-6404 (Outside the US and Canada)
From: James Nendel [mailto:james.nendel@gmail.com] Sent: Friday, August 25, 2006 11:05 PM To: Brian Dennis Cc: ccielab@groupstudy.com Subject: Re: QoS — SCOTT or the BRIANS
Brian
Please can you show me the configuration of the physical interface that holds the Virtual-template, I just do not get why I can not do this in subinterfaces
Thanks James On 8/26/06, Brian Dennis wrote: Maybe I’m missing the point of your question but when you apply a policy-map to a virtual template interface the policy will be inherited by the virtual access interface when the PPPoFR connection comes up. See below:
hostname Rack1R3 ! class-map match-all PPPoFR_MAP match any ! policy-map PPPoFR_POLICY class PPPoFR_MAP police 8000 conform-action transmitexceed-action drop ! interface Virtual-Template1 ip address 155.1.13.3 255.255.255.0 service-policy output PPPoFR_POLICY
Rack1R3#sho policy-map interface virtual-template 1 Virtual-Template1
Service-policy output: PPPoFR_POLICY
Service policy content is displayed for cloned interfaces only such as vaccess and sessions Rack1R3# Rack1R3#sho policy-map interface virtual-access 1 Virtual-Access1
Service-policy output: PPPoFR_POLICY
Class-map: PPPoFR_MAP (match-all) 1 packets, 14 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any police: cir 8000 bps, bc 1500 bytes conformed 0 packets, 0 bytes; actions: transmit exceeded 0 packets, 0 bytes; actions: drop conformed 0 bps, exceed 0 bps
Class-map: class-default (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Rack1R3#ping 155.1.13.1
Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 155.1.13.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 32/32/36 ms Rack1R3#sho policy-map interface virtual-access 1 Virtual-Access1
Service-policy output: PPPoFR_POLICY
Class-map: PPPoFR_MAP (match-all) 7 packets, 558 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any police: cir 8000 bps, bc 1500 bytes conformed 5 packets, 530 bytes; actions: transmit exceeded 0 packets, 0 bytes; actions: drop conformed 0 bps, exceed 0 bps
Class-map: class-default (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Rack1R3#ping 155.1.13.1 size 1500
Type escape sequence to abort. Sending 5, 1500-byte ICMP Echos to 155.1.13.1, timeout is 2 seconds: …… Success rate is 0 percent (0/5) Rack1R3#sho policy-map interface virtual-access 1 Virtual-Access1
Service-policy output: PPPoFR_POLICY
Class-map: PPPoFR_MAP (match-all) 14 packets, 8116 bytes 5 minute offered rate 3000 bps, drop rate 3000 bps Match: any police: cir 8000 bps, bc 1500 bytes conformed 5 packets, 530 bytes; actions: transmit exceeded 5 packets, 7530 bytes; actions: drop conformed 0 bps, exceed 3000 bps
Class-map: class-default (match-any) 0 packets, 0 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: any Rack1R3#
As you can see the policy is allowing the packets that conform and dropping the ones that don’t.
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security) bdennis@internetworkexpert.com
Internetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987 Direct: 775-745-6404 (Outside the US and Canada)
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of James Nendel Sent: Friday, August 25, 2006 10:04 PM To: ccielab@groupstudy.com Subject: QoS — SCOTT or the BRIANS
Hi,
How do I enable CBWFQ in a Frame-relay p2p subinterface that is using a virtual-template ?
config-if)#service-policy out DEFAULT Class Based Weighted Fair Queueing will be applied only to the Virtual-Access interfaces associated with an MLP bundle.
#show policy-map interface virtual-template 1 Virtual-Template1
Service-policy output: DEFAULT
Service policy content is displayed only for cloned interfaces only such as vaccess and sessions
Please help Thx James