PPPoFR (with Dynamips)

February 9, 2008 @ 3:09 am · Filed under CCIE Study

What’s between these two devices?
Are you doing back to back frame relay?
Or do you have a “dynagenerated” frame relay switch?
How about the output of “show frame lmi” and “show frame pvc”
Thanks,
Joe
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Marc La Porte Sent: Friday, February 08, 2008 4:08 AM To: ccielab@groupstudy.com Subject: PPPoFR (with Dynamips)
Hi guys,
I’ve configured PPPoFR exactly as described by Brian McGahan ( http://blog.internetworkexpert.com/2008/01/07/understanding-ppp-over-frame-r elay-pppofr/), but I can get it to work with Dynamips.
Rack1R1#sh run | sec Serial1/0|Virtual-Template1 interface Serial1/0 no ip address encapsulation frame-relay serial restart-delay 0 frame-relay interface-dlci 201 ppp Virtual-Template1 interface Virtual-Template1 ip address 10.0.0.1 255.0.0.0 ppp chap hostname Rack1R1 ppp chap password 0 CISCO
Rack1R2#sh run | sec Serial1/0|Virtual-Template1 interface Serial1/0 no ip address encapsulation frame-relay serial restart-delay 0 frame-relay interface-dlci 102 ppp Virtual-Template1 interface Virtual-Template1 ip address 10.0.0.2 255.0.0.0 ppp chap hostname Rack1R2 ppp chap password 0 CISCO
Rack1R1#sh ip int brief | sec Serial1/0|Virtual-Access|Virtual-Template Serial1/0 unassigned YES unset up up Virtual-Access1 unassigned YES unset down down Virtual-Template1 10.0.0.1 YES manual down down Virtual-Access2 10.0.0.1 YES TFTP down down
Rack1R2#sh ip int brief | sec Serial1/0|Virtual-Access|Virtual-Template Serial1/0 unassigned YES unset up up Virtual-Access1 unassigned YES unset down down Virtual-Template1 10.0.0.2 YES manual down down Virtual-Access2 10.0.0.2 YES TFTP down down
The Virtual-Access1 remains down… tried debug ppp, but no output whatsoever… I’m sure it’s simple, but what am I doing wrong?
Thanks for your help! Marc (the Netherlands)