Go CCIE Go!! - A Cisco Certified Internetwork Expert

Hi Sami,
I’m also doing a task requiring MP PPPoFR.
Rack1R2#sh ppp multilink
Multilink1, bundle name is Rack1R3 Bundle up for 1d19h, total bandwidth 56, load 1/255 Receive buffer limit 24384 bytes, frag timeout 1000 ms 0/0 fragments/bytes in reassembly list 0 lost fragments, 8 reordered 0/0 discarded fragments/bytes, 0 lost received 0×55D6 received sequence, 0×55A5 sent sequence Member links: 2 active, 1 inactive (max not set, min not set) Vi1, since 1d19h Vi2, since 1d19h Vt1 (inactive)
My config looks like this (I configured a multilink interface):
multilink virtual-template 1
interface Serial0/0 no ip address encapsulation frame-relay frame-relay traffic-shaping ! interface Serial0/0.203 point-to-point frame-relay interface-dlci 203 ppp Virtual-Template1 ! interface Serial0/0.213 point-to-point frame-relay interface-dlci 213 ppp Virtual-Template1 ! ! interface Virtual-Template1 no ip address ppp authentication chap ppp multilink ppp multilink group 1
interface Multilink1 ip address 174.1.23.2 255.255.255.0 ppp multilink ppp multilink group 1
Best regards, Andras Kulcsar
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Sami Sent: Thursday, June 15, 2006 11:11 AM To: ccielab@groupstudy.com Subject: PPPoFR multilink
Group,
I am doing some PPPoFR stuff and curios to know how to see whether PPP multilink is working or not. I have following config, circuit is up I can ping remote side but show ppp multilink shows no bundle active
interface Serial0/0/0 no ip address encapsulation frame-relay frame-relay interface-dlci 302 ppp Virtual-Template1 frame-relay lmi-type cisco ! interface Serial0/1/0 no ip address encapsulation frame-relay frame-relay interface-dlci 312 ppp Virtual-Template1 ! interface Serial0/2/0 ip address 174.1.13.3 255.255.255.0 ! interface Serial0/3/0 no ip address shutdown clock rate 2000000 ! interface Virtual-Template1 ip address 174.1.23.3 255.255.255.0 ppp authentication chap ppp multilink ppp multilink group 1 ! ! ! ip http server
R3#ping 174.1.23.2
Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 174.1.23.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 56/57/60 ms R3#sho R3#show ppp mu R3#show ppp multilink No active bundles No inactive multilink interfaces R3#

R2#
interface Serial0/0/0 no ip address encapsulation frame-relay frame-relay lmi-type cisco ! interface Serial0/0/0.203 point-to-point frame-relay interface-dlci 203 ppp Virtual-Template1 ! interface Serial0/0/0.213 point-to-point frame-relay interface-dlci 213 ppp Virtual-Template1 ! interface Serial0/1/0 no ip address shutdown ! interface Virtual-Template1 ip address 174.1.23.2 255.255.255.0 ppp authentication chap ppp multilink ppp multilink group 1 ! ! ! ip http server no ip http secure-server ! !
R2#ping 174.1.23.3
Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 174.1.23.3, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 56/57/60 ms R2#sho R2#show ppp mu R2#show ppp multilink No active bundles No inactive multilink interfaces R2#
Thanks