.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
Port security
1 is the default.
Switch#show port-security interface fa0/19 Port Security : Enabled Port Status : Secure-down Violation Mode : Restrict Aging Time : 0 mins Aging Type : Absolute SecureStatic Address Aging : Disabled Maximum MAC Addresses : 1 Total MAC Addresses : 1 Configured MAC Addresses : 1 Sticky MAC Addresses : 0 Last Source Address:Vlan : 0000.0000.0000:0 Security Violation Count : 0
“Maximum MAC Addresses”
——————- Jason Plank, CCIE #16560 Network Engineer 101 Bellevue Parkway Wilmington, DE 19809 E-mail: JPlank@concordefs.com Phone: 302-793-5913
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Sami Sent: Saturday, July 22, 2006 1:51 PM To: ccielab@groupstudy.com Subject: Port security
Group,
One of the task say F0/19 accept traffic only from R4 , other host traffic should be dropped ,while port remain enabled.
> switchport port-security mac-addres 0001.1234.1111 > switchport port-security maximum 1 > switchport port-security violation restrict
Do I need port-security max-mac address to 1 or not ?
Thanks
