Go CCIE Go!! - A Cisco Certified Internetwork Expert

I had a very similar on problem on a couple of 3560s. Tried reloading, allsorts of config changes, shut/no shuts - eventually I defaulted the interfaces and deleted the port channels, then started again from scratch and all was fine! No idea what the problem was - might be worth trying?
Mike
—– Original Message —– From: “SCOTT PENDLETON” To: “Sadiq Yakasai” Cc: Sent: Friday, April 11, 2008 12:56 PM Subject: Re: peculiar etherchannel issue
>I haven’t found anything helpful in the debugs so far. > > The spanning-tree command might help. The remote switch is on a stick and > is only connected to the 6500. > > [6500-1] -etherchannel-> [3130G] > | NIC1 > [Server1] [Server2]..[ServerX] > | NIC2 > [6500-2] -etherchannel-> [3130G] > > > —– Original Message —- > From: Sadiq Yakasai > To: SCOTT PENDLETON > Cc: ccielab@groupstudy.com > Sent: Thursday, April 10, 2008 3:10:48 PM > Subject: Re: peculiar etherchannel issue > > Thats a really strange one Scott. Any debugs? > > > Pass the CCIE in six weeks, Guaranteed! > http://www.certscience.com/CCIE > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html > > > Pass the CCIE in six weeks, Guaranteed! > http://www.certscience.com/CCIE > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
Pass the CCIE in six weeks, Guaranteed! http://www.certscience.com/CCIE