.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
peculiar etherchannel issue
My initial troubleshooting would hover around spanning tree issues. LOOPS, ROOT etc…
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of SCOTT PENDLETON Sent: Friday, 11 April 2008 5:06 AM To: ccielab@groupstudy.com Subject: peculiar etherchannel issue
I have two identically configured 6500s with the same IOS code. If I configure a two port ether-channel with either LACP or PAGp to a remote switch with the first 6500 everything works fine. If I do it with the second 6500 the port-channel interface comes up and stays up for about a minute before the remote switch detects an etherchannel misconfiguration and puts both ports into err-disabled state. I’ve tried it with three different remote switches and I get the same result. It works with the one 6500, but not the other. If I clear the error the link comes back up but repeats the same process. I’ve tried different physical ports on the 6500, same result. Has anyone seen anything like that before? Scott P.
Pass the CCIE in six weeks, Guaranteed! http://www.certscience.com/CCIE
