Go CCIE Go!! - A Cisco Certified Internetwork Expert

DEAR ALL
I am trying to configure ospf between router and netscreen I am facing little problem!! while its remain in init state for ospf !! can any body help me ?
i am copying the config

set protocol ospf set enable set area 0.0.0.144 set auth-server “Local” id 0 set auth-server “Local” server-name “Local” set auth default auth server “Local” set admin http redirect set admin auth timeout 10 set admin auth server “Local” set admin format dos set zone “Trust” vrouter “trust-vr” set zone “Untrust” vrouter “trust-vr” set zone “DMZ” vrouter “trust-vr” set zone “VLAN” vrouter “trust-vr” set zone “Trust” tcp-rst set zone “Untrust” block unset zone “Untrust” tcp-rst set zone “MGT” block set zone “DMZ” tcp-rst set zone “VLAN” block set zone “VLAN” tcp-rst unset zone “Untrust” screen tear-drop unset zone “Untrust” screen syn-flood unset zone “Untrust” screen ping-death unset zone “Untrust” screen ip-filter-src unset zone “Untrust” screen land set zone “V1-Untrust” screen tear-drop set zone “V1-Untrust” screen syn-flood set zone “V1-Untrust” screen ping-death set zone “V1-Untrust” screen ip-filter-src set zone “V1-Untrust” screen land set interface “ethernet0/0″ zone “Trust” set interface “ethernet0/1″ zone “DMZ” set interface “ethernet0/2″ zone “Untrust” unset interface vlan1 ip set interface ethernet0/0 ip set interface ethernet0/0 route set interface ethernet0/2 ip set interface ethernet0/2 route unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 manage-ip set interface ethernet0/2 manage-ip set interface ethernet0/0 ip manageable set interface ethernet0/2 ip manageable unset interface ethernet0/0 manage telnet unset interface ethernet0/0 manage snmp set interface ethernet0/0 manage mtrace set interface ethernet0/2 manage ping set interface ethernet0/2 manage ssh set interface ethernet0/2 manage ssl set interface ethernet0/2 manage web set interface vlan1 manage mtrace unset flow no-tcp-seq-check set flow tcp-syn-check set hostname DCK set dbuf size 1024 set ike respond-bad-spi 1 set nsrp cluster id 1 set nsrp cluster name DCK set nsrp rto-mirror sync set nsrp vsd-group id 0 priority 100 set nsrp vsd-group id 0 preempt set nsrp secondary-path ethernet0/2 set nsrp vsd-group id 0 monitor interface ethernet0/0 set nsrp vsd-group id 0 monitor interface ethernet0/2 set nsrp ha-link probe set pki authority default scep mode “auto” set pki x509 default cert-path partial set url protocol sc-cpa exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set ssh enable set config lock timeout 5 set dl-buf size 4718592 set vrouter “untrust-vr” set source-routing enable exit
set vrouter “trust-vr” set router-id set source-routing enable exit
set interface ethernet0/0 protocol ospf area 0.0.0.144 set interface ethernet0/0 protocol ospf enable set interface ethernet0/0 protocol ospf priority 0 set interface ethernet0/0 protocol ospf cost 1 set vrouter “untrust-vr” exit set vrouter “trust-vr” exit

## 15:54:09 : ospf: send hello pkt on ethernet0/0 len 44 ## 15:54:09 : ospf: process rx pak len 44 from 10.32.124.100 on ethernet0/0 in vr trust-vr router-id 10.32.124.100 ## 15:54:11 : ospf: process rx pak len 60 from 10.32.124.20 on ethernet0/0 in vr trust-vr router-id 10.32.134.10 ## 15:54:11 : ospf: recv pkt on ethernet0/0, 10.32.124.20->224.0.0.5 ## 15:54:11 : ospf: invalid IP pak len 80, should be (ospf 48 + lls 3072 + IP 20) ## 15:54:19 : ospf: send hello dr 0.0.0.0 bdr 0.0.0.0 active neighbors: ## 15:54:19 : ospf: send hello pkt on ethernet0/0 len 44 ## 15:54:19 : ospf: process rx pak len 44 from 10.32.144.10 on ethernet0/0 in vr trust-vr router-id 10.32.134.20 ## 15:54:21 : ospf: process rx pak len 60 from 10.90.10.1on ethernet0/0 in vr trust-vr router-id 10.132.134.10 ## 15:54:21 : ospf: recv pkt on ethernet0/0, 10.90.10.1->224.0.0.5 ## 15:54:21 : ospf: invalid IP pak len 80, should be (ospf 48 + lls 3072 + IP 20) ## 15:54:29 : ospf: send hello dr 0.0.0.0 bdr 0.0.0.0 active neighbors: ## 15:54:29 : ospf: send hello pkt on ethernet0/0 len 44 ## 15:54:29 : ospf: process rx pak len 44 from 10.32.144.10 on ethernet0/0 in vr trust-vr router-id 10.32.144.10 ## 15:54:31 : ospf: process rx pak len 60 from 10.90.10.1on ethernet0/0 in vr trust-vr router-id 10.32.144.10 ## 15:54:31 : ospf: recv pkt on ethernet0/0, 10.132.14.2->224.0.0.5 ## 15:54:31 : ospf: invalid IP pak len 80, should be (ospf 48 + lls 3072 + IP 20) ## 15:54:39 : ospf: send hello dr 0.0.0.0 bdr 0.0.0.0 active neighbors: ## 15:54:39 : ospf: send hello pkt on ethernet0/0 len 44 ## 15:54:39 : ospf: process rx pak len 44 from 10.102.12.1 on ethernet0/0 in vr trust-vr router-id 10.32.144.10 ## 15:54:41 : ospf: process rx pak len 60 from 10.90.10.1on ethernet0/0 in vr trust-vr router-id 10.32.144.10 ## 15:54:41 : ospf: recv pkt on ethernet0/0, 10.132.124.2->224.0.0.5 ## 15:54:41 : ospf: invalid IP pak len 80, should be (ospf 48 + lls 3072 + IP 20) ## 15:54:49 : ospf: send hello dr 0.0.0.0 bdr 0.0.0.0 active neighbors: ## 15:54:49 : ospf: send hello pkt on ethernet0/0 len 44 ## 15:54:49 : ospf: process rx pak len 44 from 10.132.124.10 on ethernet0/0 in vr trust-vr router-id 10.32.144.10 ## 15:54:51 : ospf: process rx pak len 60 from 10.90.10.1on ethernet0/0 in vr trust-vr router-id 10.132.142.10 ## 15:54:51 : ospf: recv pkt on ethernet0/0, 10.2.114.2->224.0.0.5 ## 15:54:51 : ospf: invalid IP pak len 80, should be (ospf 48 + lls 3072 + IP 20)
_________________________________________________________________ On the road to retirement? Check out MSN Life Events for advice on how to get there! http://lifeevents.msn.com/category.aspx?cid=Retirement