.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
ospf neighbor command
Hi, I run to a similar situation http://www.groupstudy.com/archives/ccielab/200606/msg01444.html
Regards Victor.-
—–Mensaje original—– De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de Melwani, Manoj J Enviado el: Viernes, 04 de Agosto de 2006 12:03 p.m. Para: ELDHO PAUL; ccielab@groupstudy.com Asunto: RE: ospf neighbor command
Can you paste your configs…
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of ELDHO PAUL Sent: Friday, August 04, 2006 11:47 AM To: ccielab@groupstudy.com Subject: ospf neighbor command
Hi,
I changed the interface type of my ethernet interface to non broadcast using the command ip ospf network non-broadcast. Then I tried to configure neighbor with the neighboring router through this interface using the command neighbor 183.1.5.5 But it displays a message “OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint networks”
When i say show ip ospf int eth0/0 it shows the interface type as NON_BROADCAST.
Is it an expected behaviour?
Please advice.
Regards, Eldho.
