.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
OSPF intra area filtering
Hello to all CCIE candidates! I’ve the following topology:
lo:1.1.1.x->R1—R2—-R3
R1 - area 1 R2 - ABR R3 - area 0
The issue that I want that 1.1.1.x will not be advertised to the R2(ABR) and all other routers int area 0. So the problem here is that I want to find workaround to filter route in intra- area and not on ABR with area 1 range 1.1.1.0 255.255.255.0 not-advertise command. Also because there are about 20 routers in area 0 that shouldn’t receive 1.1.1.x and I don’t want to use distribute-list x in on each router in area 0 to filter the local routing table on each router.
May be some of you have any suggestion how to get this workaround?
——————– Best regards, Sergei
Blogs and organic groups at http://www.ccie.net
