OSPF DISTANCE command, IEWB LAB 13, OSPF task 3.7

March 8, 2008 @ 8:09 am · Filed under CCIE Study

I dont use IEWB myself but has anyone tried putting the configs in dynamics or a home rack and then compared it against a remote rack configuration?
Just a thought.
HTH Gary —– Original Message —– From: “Sadiq Yakasai” To: “Herbert Maosa” Cc: “Cisco certification” Sent: Saturday, March 08, 2008 12:15 PM Subject: Re: OSPF DISTANCE command, IEWB LAB 13, OSPF task 3.7
> Hey Herbert, > > This is one of those labs that there has been numerous discussion on > and it still flags up as been a confusion. > > While some in the past have even opened a TAC case, thinking its a bug > within IOS and some have argued the distance command in OSPF “works > alike charm” as one guru in this forum has said, it still remains an > enigma if you asked me. > > Anyways, so my conclusion to this problem: If you are tyring to make > some prefixes chosen over others within the same routing protocol, I > will use metric to solve the problem. While making a router prefer > prefixes between two or more routing protocols, I will use AD as the > determining factor. > > It will be interresting to see what the guys from IE would have to say > about that particular lab you are working on. I have copied and pasted > their solution, but it never worked. This problem hunted me down in > the first attempt on the lab, IT JUST DOESNT WORK!! > > Anyways, lets see if any other person has found a solution for the > problem. > > HTH > > Sadiq > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html

Bookmark this post:These icons link to social bookmarking sites where readers can share and discover new web pages.