Go CCIE Go!! - A Cisco Certified Internetwork Expert

Dear All,
can any one help me in this . i have to enable voice services on cisco 3745 so i use NM-HDV1 for VIC-4FXS-DID voice card. I inserted voice (VIC-4FXS-DID) card in NM-HDV1 but it showing following error ,( This is the output of Show diag command.) Slot 4: Unknown (type 922) Port adapter Port adapter is disabled deactivated Port adapter insertion time unknown EEPROM contents at hardware discovery: Hardware Revision : 5.3 Top Assy. Part Number : 800-21590-02 Board Revision : B0 Deviation Number : 0-0 Fab Version : 03 PCB Serial Number : FOC11455E1U RMA Test History : 00 RMA Number : 0-0-0-0 RMA History : 00 Product (FRU) Number : NM-HD-1V Version Identifier (VID) : V01 EEPROM format version 4 EEPROM contents (hex): 0×00: 04 FF 40 03 9A 41 05 03 C0 46 03 20 00 54 56 02 0×10: 42 42 30 80 00 00 00 00 02 03 C1 8B 46 4F 43 31 0×20: 31 34 35 35 45 31 55 03 00 81 00 00 00 00 04 00 0×30: CB 88 4E 4D 2D 48 44 2D 31 56 89 56 30 31 20 FF 0×40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0×50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0×60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0×70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
I searched on cisco on found that NM_HDV1 supports VIC-4FXS-DID voice card and all the compatible hardware are in built in NM-HDV1. I reinserted the card but still voice card is not detecting.
Please help.
Regards Hemant
Blogs and organic groups at http://www.ccie.net