Go CCIE Go!! - A Cisco Certified Internetwork Expert

The data size is in G Byte, but NIC speed is in M bit. The calculation comes about 6 min * 8 = 48 min. Thanks, John Kim> Date: Tue, 11 Dec 2007 16:18:51 +0100> From: wilhelm@boeddinghaus.de> To: itsfortarget@gmail.com> CC: ccielab@groupstudy.com> Subject: Re: NEED HELP………………> > Hi,> > there are many different linecards for the 6500 series. Which gigabit> linecard do you have? Have you got a switchfabric in the switch?> > If you have 6148 or 6548 cards do not give the servers ports next to> each other. On some cards 8 or 12 ports share buffer and memory.> > Greetings> > Wilhelm> > > itsfortarget iwillgetit schrieb:> > Dear Group,> >> > Pls find a solution for this problem.> >> > I have two server connected to a 6509 Switch’s Gigabit ethernet> > Ports.Oneserver(old)’s Bandwidth is 100 Mbps.> >> > I have to copy data having size of 35 GB from Old to new ,Copying delayed so> > much.> >> > *Suppose the data transfer takes place at 100 Mbps Because Old is working in> > 100 Mbps.> >> > Then it should take* 5.973333333 *Minutes(ie 35 GB / 100 MB)> >> > *But it takes *43* Minutes.> >> > *Both NICs are full duplex> >> > *I have checked Auto negotiation.> >> >