.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
Multicast Question
Guys,
I have a simple question about multicast. I’m wondering why ip multicast route static always perform on client attached router and no ip multicast route static to come back from the source ?
like these example of question :
Multicast Source ——– R4 ———–R3————–R1——-Multicast Client
Connection between R4 - R3 - R1 happen to be frame-relay, so it is a hub and spoke topology with R3 as the hub.
The solution is create tunnel between R4 and R1 using ip mroute to multcast source on R1 with Tunnel interface as the gateway and there is no ip multicast static route to go back to multicast client.
The Question is How R4 going back to R1 ? Using unicast routing table ?
If Yes then it’s not going back using the interface tunnel right ? so it is not a symectric routing solution.
Hope you guys know what I meant
Thanks a lot
— Mark Stephanus Chandra
Blogs and organic groups at http://www.ccie.net
