Go CCIE Go!! - A Cisco Certified Internetwork Expert

The IOS Switching services config guide (see link below) has a good table listing the old tag-switching commands and their newer mpls replacements.
http://www.cisco.com/en/US/docs/ios/12_2/switch/configuration/guide/xcftagov_ps1835_TSD_Products_Configuration_Guide_Chapter.html#wp1026760
HTH
-Thomas Fowles CCIE No.18762
On Mon, Aug 4, 2008 at 8:34 AM, Shaughn Smith wrote:
> That is not an issue. > > Its an old command, the new command is “MPLS IP” on the interface > > TDP/LDP will still work either way > > —–Original Message—– > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of > yungli2008@gmail.com > Sent: Monday, August 04, 2008 2:08 PM > To: ccielab@groupstudy.com > Subject: MPLS in Dynamip > > Hi experts > I am working MPLS in dynamip with IOS c7200-k91p-mz.122-25.S9.bin > Facing this problme > > Rack1R1(config)#mpls label protocol ldp > Rack1R1(config)#int fastethernet 0/0 > Rack1R1(config-if)#tag-switching ip > % Command accepted but obsolete, unreleased or unsupported; see > documentation. > > But its working in c3640-jk9o3s-mz.123-14.T7.bin > > Can anyone guide me? > > advance thanks > Li > > > Blogs and organic groups at http://www.ccie.net > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html > > > Blogs and organic groups at http://www.ccie.net > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net