Go CCIE Go!! - A Cisco Certified Internetwork Expert

Cisco is replacing the old version of mpls and instated of ‘ tag IP ‘ you can use ‘ mpls ip ‘ under fastethernet.
Tag switching still available, but as MPLS became a industry standard, you don’t need to use tag commands anymore.
if you for some reason need to test TDP (tag switching) you can just change the protocol ‘ mpls label protocol (LDP|TDP|Both)’ under any interface.
thx
Alberto
2008/8/4
> Hi experts > I am working MPLS in dynamip with IOS c7200-k91p-mz.122-25.S9.bin > Facing this problme > > Rack1R1(config)#mpls label protocol ldp > Rack1R1(config)#int fastethernet 0/0 > Rack1R1(config-if)#tag-switching ip > % Command accepted but obsolete, unreleased or unsupported; see > documentation. > > But its working in c3640-jk9o3s-mz.123-14.T7.bin > > Can anyone guide me? > > advance thanks > Li > > > Blogs and organic groups at http://www.ccie.net > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html > > > > > > > >
— Alberto G. Fernandes dos Santos CCIE R&S Written Exam CCIP, CCNP, CCNA ITIL Foundation Cisco ID CSCO10934906 Cel +55 (11)9479-0796 albertofsantos@gmail.com (NEW)
Blogs and organic groups at http://www.ccie.net