MLPoFR & FRTS

March 31, 2008 @ 8:09 pm · Filed under CCIE Study

Hi Joseph,
If I do not use any QoS feature (eg LFI), do I still need to enable fragmentation? Meanwhile, my configuration (without FRTS) is still working by using simple PING test. How can I discover the potential problem if not enabling FRTS?
Appreciate if you could share the experience with me.
Regards, CH
On Mon, Mar 31, 2008 at 12:57 PM, Joseph Saad wrote:
> How do you enable fragmentation without FRTS? > > > > On Mon, Mar 31, 2008 at 7:47 AM, C Chan wrote: > > > Hi all experts, > > > > Is it mandatory to turn on frame-relay shaping when running MLPoFR? > > > > According to DocCD, the FRTS is prerequisite for MLPoFR, I am wondering > > the > > rationale might relate to QoS topic it describes. > > > > Practically, I tried the MLPoFR *without* enabling FRTS, it still works > > fine. However, the router prompt me the following error message if I do > > not > > enable FRTS. > > > > Could anybody share his experience when dealing with MLPoFR? What is the > > consequence if I do not turn on FRTS? > > > > Regards, > > CH > > > > *Remark* > > > > ———————————————————————————————————————————————————————————————— > > (Using Multilink PPP over Frame Relay) > > > > http://www.cisco.com/en/US/docs/ios/12_4/qos/configuration/guide/qslfifr.html#wp1064366 > > , > > > > 12.3(22) > > Router1# > > *Mar 1 02:29:25.887: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly > > on > > Link Virtual-Access1 Bundle Multilink34 :Frame Relay traffic shaping > > must be > > enabled > > *Mar 1 02:29:25.899: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly > > on > > Link Virtual-Access2 Bundle Multilink34 :Frame Relay traffic shaping > > must be > > enabled > > > > 12.4(18) > > Router2# > > *Mar 30 09:16:17.835: %LINK-3-UPDOWN: Interface Multilink35, changed > > state > > to down > > *Mar 30 09:16:17.911: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly > > on > > Link Virtual-Access1 Bundle Multilink35 :Frame Relay traffic shaping > > must be > > enabled > > *Mar 30 09:16:17.915: %LINK-3-UPDOWN: Interface Multilink35, changed > > state > > to up > > *Mar 30 09:16:17.923: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly > > on > > Link Virtual-Access2 Bundle Multilink35 :Frame Relay traffic shaping > > must be > > enabled > > > > _______________________________________________________________________ > > Subscription information may be found at: > > http://www.groupstudy.com/list/CCIELab.html

Bookmark this post:These icons link to social bookmarking sites where readers can share and discover new web pages.