Go CCIE Go!! - A Cisco Certified Internetwork Expert

Frog, If you are dealing with T1/E1 controllers, simply do not put “ccm manager config-server x.x.x.x” command on the mgcp gateway. Now you are choose any successive # of channels per gateway as you want. The only disadvantage is that you will have to manual reset the gateway when needed and also the callmanager will not be able to push the configuration anymore.
HTH, Tarun

On Dec 27, 2007 4:24 AM, Radioactive Frog wrote:
> Godswill, > > there are total 5 row in CCM where you can put different E1 ports channel > settings (as Avner suggested). > So maximum 5 E1/T1 channels in total. > > For example: > > Change B-Channel Maintenance Status 1 S2/DS1-0@BR1 = 0000 0111 1111 > 1111 > 1111 1111 > Change B-Channel Maintenance Status 2 S2/DS1-1@BR1 = 0000 0111 1111 > 1111 > 1111 1111 > Change B-Channel Maintenance Status 3 S2/DS1-2@BR1 = 0000 0111 1111 > 1111 > 1111 1111 > Change B-Channel Maintenance Status 4 S2/DS1-3@BR1 = 0000 0111 1111 > 1111 > 1111 1111 > Change B-Channel Maintenance Status 5 S2/DS1-4@BR1 = 0000 0111 1111 > 1111 > 1111 1111 > > Cheers > Frog > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html