Go CCIE Go!! - A Cisco Certified Internetwork Expert

Many thanks,
Regards,

On Jan 15, 2008 3:47 AM, Scott Morris wrote:
> Being that IPv6 is a hex-based address, I would convert it to hex to have > the same binary equivalent. > > HTH, > > > Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, > JNCIE-M > #153, JNCIS-ER, CISSP, et al. > CCSI/JNCI-M/JNCI-ER > VP - Technical Training - IPexpert, Inc. > IPexpert Sr. Technical Instructor > > A Cisco Learning Partner - We Accept Learning Credits! > > smorris@ipexpert.com > > > > Telephone: +1.810.326.1444 > Fax: +1.810.454.0130 > http://www.ipexpert.com > > > > > > —–Original Message—– > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of > George Goglidze > Sent: Sunday, January 13, 2008 5:31 PM > To: Cisco certification > Subject: IPV6 question understanding > > Hi all, > > I have one question, > > if on the IPv6 section, they ask you to enable eui-64 and they give you > subnet let’s say 2001:aaa:111::0/64 but they tell you, you should use IPv4 > address’s 3rd octet in the network of IPV6. > > and let’s say you have in IPv4 25.25.56.1/24 do you just take 56 and put > in > network as following: 2001:aaa:111:56::/64 or you translate 56 to HEX and > put 38(hex of 56) -> 2001:aaa:111:38::/64 > > I think I need to use directly 56, but I would like some to confirm me > this. > > Many thanks, > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html