.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
IPv6 on a bridged interface
Hi Hobbs,
You are probably missing a command like ‘bridge 1 route ipv6′, that doesnt exist afaik. 
I think it depends on the platform if it can bridge ipv6? If all else fails tunnel it?
Regards, Wouter
2009/1/6 Hobbs
> Hello, > > I have some issues running IPv6 on a bridged interface. For example > ethernet0/0 is in bridge-group 1 (with an IPv4 address on the BVI). When I > put an IPv6 address on the BVI I have no connectivity to other routers. > When > I put the IPv6 address on the Ethernet interface I have connectivity (ping, > etc) but the interface does not accept routing updates via RIP. Once I take > the bridge-group of the interface - RIP updates are accepted. > > Any ideas how to make IPv6 routing and Bridged interfaces work together? > > R2 —–e0/1 R1 e0/0 —— R3 > > So in other words R1 needs to bridge IPv4 between R3 and R2 (they are on > the > same IPv4 subnet) > R1 and R3 also need to exchange IPv6 routes via RIPng. > > Thanks, > > > Blogs and organic groups at http://www.ccie.net > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
