.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
IP RSVP
Hi experts,
I am working with MPLS TE
R1 Fa0/0 and R2 fa0/0 connected via switch
Bit configuration below R1 ! interface FastEthernet0/0 ip address 151.1.12.1 255.255.255.0 duplex full mpls label protocol ldp mpls ip mpls traffic-eng tunnels ip rsvp bandwidth R2 ! interface FastEthernet0/0 ip address 151.1.12.2 255.255.255.0 duplex full mpls label protocol ldp mpls ip mpls traffic-eng tunnels ip rsvp bandwidth
The IGP and BGP are fully reachable in my POD. seems everything is fine MPLS are working fine I enabled ( mpls traffic-eng router-id Loopback0, mpls traffic-eng area 0 ) under ospf process. I enabled” mpls traffic-eng tunnels” in global and interface mode
my problem is Rack1R2#show ip rsvp neighbor
Rack1R2# ( it showing nothing but mpls properly working in my POD I mean no problems in MPLS)
Can anyone help me?
I am using following IOS (C7200-ADVENTERPRISEK9-M), Version 12.4(15)T5, RELEASE SOFTWARE (fc4) (C3725-ADVIPSERVICESK9-M), Version 12.4(21), RELEASE SOFTWARE (fc1) (C3640-JK9O3S-M), Version 12.4(16), RELEASE SOFTWARE (fc1)
I am facing this problem in dynamip
Regards Li
Blogs and organic groups at http://www.ccie.net
