.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
ip ospf network point-to-multipoint non-broadcast
Hello,
I haven’t used ip ospf network point-to-multipoint non-broadcast, but I think you need to use this command when you want you use neighbor command. Because neighbor command can only be configured in non-broadcast network.
One use of neighbor command is with option cost to assign metrics to routes from different neighbor.
HTH,
Phuc On Dec 30, 2007 1:23 AM, srinivas pv wrote:
> Hi, > > Under exactly which scenario/circumstances do we need OSPF network type > ‘ip > ospf network point-to-multipoint non-broadcast’? (i.e where other OSPF > network types CAN NOT be useful) > > AFAIK, we can accomplish OSPF adjacencies with ‘ip ospf network > point-to-multipoint’ or ‘ip ospf network non-broadcast’ (apart from other > network types like broadcast etc), but could not understand at which > specific circumstance we need ‘ip ospf network point-to-multipoint > non-broadcast’ > > I checked OSPF Config guide by William R. Parkhurst, but I did not see > above > network type. > > Thanks, > Srinivas > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
