.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
IEWB Vol 2 lab 13 task 3.7, OSPF distance command
Dear All,
I’m trying to stop feedback traffic by using tag with route-map but it is not working ….
Any one who try lab2 and used tag to stop routing loop…I spent more than two days only for this to understand all the technique here
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Fahad Khan Sent: 2008-09-01 11:41 To: Julio Carrasco Cc: ccielab@groupstudy.com Subject: Re: IEWB Vol 2 lab 13 task 3.7, OSPF distance command
check this one as well,
distance 109 0.0.0.0 255.255.255.255 1
and then tell me the outcome.
On 8/29/08, Julio Carrasco wrote: > > Hello, > > I have issued the next commands: > router ospf 1 > distance 109 150.1.1.1 0.0.0.0 1 > ! > access-list 1 permit 139.1.2.0 > access-list 1 permit 139.1.6.0 > access-list 1 permit 139.1.7.0 > access-list 1 permit 139.1.11.0 > > But I still seeing the routes that configured on the > access-list with distance 110. I hcecked the IEWB solution, and they did > the > same but with an standard named ACL. > > Could any one help me to figure out why isn4t working the distance command. > > Best regards, > Julio Carrasco. > > > Blogs and organic groups at http://www.ccie.net > >
