.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
IEWB - Lab 6 - Task 6.4 (Multicast Testing)
Hi,
In my understanding,
ip igmp join-group will cause the router to process the multicast traffic ip igmp static-group will cause the router to flood the traffic on to the multicast enabled interfaces but not process it.
On 7/31/06, Anderson Mota Alves wrote: > > Hi Brians, > > The question is asking you to configure the igmp group 225.25.25.25 for > testing purposes, to be configured on SW1 and to not allow SW1 to process > switch this traffic: > > From my understanding in order for you to enable a group to be fast switch > process you need to configure it with command “ip igmp static-group” so I > configured using the command “ip igmp join-group” but when I took a look > in > the solution for this task the solution was pointing the correct answer > being “ip igmp static-group”.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/himc_r/mlt_i1h.htm#wp1130052
Thanks
Shanky
Is the solution wrong or I may be missing something here? > > Thanks, > > Andy > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
