Go CCIE Go!! - A Cisco Certified Internetwork Expert

Here they are.
—————-R1——————————— service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Rack1R1 ! boot-start-marker boot-end-marker ! enable password cisco ! no aaa new-model memory-size iomem 5 ! ! ip cef no ip domain lookup ! ! ip multicast-routing ipv6 unicast-routing ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 ip address 150.1.1.1 255.255.255.0 ! interface FastEthernet0/0 ip address 192.10.1.1 255.255.255.0 ip pim sparse-mode ip ospf network non-broadcast ip ospf hello-interval 10 duplex auto speed auto ipv6 address 2001:192:10:1::/64 ipv6 address 2001:192:10:1::/64 eui-64 ipv6 ospf 1 area 0 ! interface Serial1/0 no ip address encapsulation frame-relay serial restart-delay 0 no frame-relay inverse-arp frame-relay lmi-type ansi ! interface Serial1/0.1 point-to-point ip address 141.1.123.1 255.255.255.0 ip pim sparse-mode ip ospf network non-broadcast ip ospf priority 0 ipv6 address 2001:141:1:12::1/64 ipv6 ospf network point-to-point ipv6 ospf 1 area 1 frame-relay interface-dlci 102 ! interface Serial1/1 no ip address shutdown serial restart-delay 0 ! interface Serial1/2 no ip address shutdown serial restart-delay 0 ! interface Serial1/3 no ip address shutdown serial restart-delay 0 ! router ospf 1 router-id 150.1.1.1 log-adjacency-changes network 141.1.123.1 0.0.0.0 area 0 network 150.1.1.1 0.0.0.0 area 0 network 192.10.1.1 0.0.0.0 area 51 neighbor 192.10.1.254 ! ip http server ip forward-protocol nd ! ! ip pim autorp listener ! ipv6 router ospf 1 log-adjacency-changes area 1 range 2001:141:1::/59 ! ! ! ! control-plane ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 privilege level 15 logging synchronous line aux 0 exec-timeout 0 0 privilege level 15 line vty 0 4 password cisco login ! ! end
Rack1R1#sh ip pim nei PIM Neighbor Table Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, S - State Refresh Capable Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode 141.1.123.2 Serial1/0.1 00:53:17/00:01:29 v2 100/ S Rack1R1#sh ip pim rp map PIM Group-to-RP Mappings
Group(s) 225.0.0.0/8 RP 150.1.2.2 (?), v2v1 Info source: 141.1.0.8 (?), elected via Auto-RP Uptime: 00:38:14, expires: 00:02:26 Group(s) 239.0.0.0/8 RP 150.1.5.5 (?), v2v1 Info source: 141.1.0.8 (?), elected via Auto-RP Uptime: 00:38:14, expires: 00:02:28
——————–R2——————————– service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Rack1R2 ! boot-start-marker boot-end-marker ! enable password cisco ! no aaa new-model memory-size iomem 5 ! ! ip cef no ip domain lookup ! ! ip multicast-routing ipv6 unicast-routing ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 ip address 150.1.2.2 255.255.255.0 ip pim sparse-mode ! interface Tunnel0 ip address 141.1.25.2 255.255.255.0 tunnel source FastEthernet0/0 tunnel destination 141.1.0.5 ! interface FastEthernet0/0 ip address 141.1.0.2 255.255.255.0 ip pim sparse-mode duplex auto speed auto ipv6 address 2001:141:1:25::1/64 ipv6 ospf 1 area 1 ! interface Serial1/0 ip address 141.1.123.2 255.255.255.0 ip pim dr-priority 100 ip pim nbma-mode ip pim sparse-mode encapsulation frame-relay ipv6 address 2001:141:1:12::2/64 ipv6 ospf network point-to-point ipv6 ospf 1 area 1 serial restart-delay 0 frame-relay map ipv6 FE80::CE00:12FF:FE6C:0 201 frame-relay map ip 141.1.123.1 201 broadcast frame-relay map ip 141.1.123.3 203 broadcast frame-relay map ipv6 2001:141:1:12::1 201 broadcast no frame-relay inverse-arp frame-relay lmi-type ansi ! interface Serial1/1 no ip address encapsulation frame-relay serial restart-delay 0 ! interface Serial1/2 no ip address shutdown serial restart-delay 0 ! interface Serial1/3 no ip address shutdown serial restart-delay 0 ! router ospf 1 router-id 150.1.2.2 log-adjacency-changes area 1 nssa no-summary network 141.1.0.2 0.0.0.0 area 1 network 141.1.25.2 0.0.0.0 area 0 network 141.1.123.2 0.0.0.0 area 0 network 150.1.2.2 0.0.0.0 area 0 neighbor 141.1.123.1 neighbor 141.1.123.3 ! ip http server ip forward-protocol nd ! ! ip pim autorp listener ip pim send-rp-announce Loopback0 scope 16 group-list 52 ! access-list 52 permit 255.0.0.0 0.255.255.255 access-list 52 permit 225.0.0.0 0.255.255.255 ipv6 router ospf 1 log-adjacency-changes ! ! ! ! control-plane ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 privilege level 15 logging synchronous line aux 0 exec-timeout 0 0 privilege level 15 line vty 0 4 password cisco login ! ! end
Rack1R2#sh ip pim nei PIM Neighbor Table Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, S - State Refresh Capable Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode 141.1.0.5 FastEthernet0/0 00:53:30/00:01:26 v2 1 / S 141.1.0.8 FastEthernet0/0 00:53:31/00:01:27 v2 1 / DR S 141.1.54.4 Serial1/0 00:51:50/00:01:41 v2 1 / S 141.1.54.5 Serial1/0 00:53:19/00:01:41 v2 1 / S 141.1.123.3 Serial1/0 00:54:31/00:01:16 v2 1 / S 141.1.123.1 Serial1/0 00:54:32/00:01:18 v2 1 / S Rack1R2#sh ip pim rp map PIM Group-to-RP Mappings This system is an RP (Auto-RP)
Group(s) 225.0.0.0/8 RP 150.1.2.2 (?), v2v1 Info source: 141.1.0.8 (?), elected via Auto-RP Uptime: 00:52:43, expires: 00:02:01 Group(s) 239.0.0.0/8 RP 150.1.5.5 (?), v2v1 Info source: 141.1.0.8 (?), elected via Auto-RP Uptime: 00:52:33, expires: 00:02:05
——————-R3———————————— service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Rack1R3 ! boot-start-marker boot-end-marker ! enable password cisco ! no aaa new-model memory-size iomem 5 ! ! ip cef no ip domain lookup ! ! ip multicast-routing ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 ip address 150.1.3.3 255.255.255.0 ! interface Ethernet0/0 ip address 141.1.37.3 255.255.255.0 ip pim sparse-mode ip igmp join-group 225.25.25.25 full-duplex ! interface Ethernet0/1 ip address 141.1.36.3 255.255.255.0 ip pim sparse-mode ip igmp join-group 239.39.39.39 full-duplex ! interface Ethernet0/2 no ip address shutdown half-duplex ! interface Ethernet0/3 no ip address shutdown half-duplex ! interface Serial1/0 no ip address encapsulation frame-relay serial restart-delay 0 no frame-relay inverse-arp frame-relay lmi-type ansi ! interface Serial1/0.1 point-to-point ip address 141.1.123.3 255.255.255.0 ip pim sparse-mode ip ospf network non-broadcast ip ospf priority 0 frame-relay interface-dlci 302 ! interface Serial1/1 no ip address shutdown serial restart-delay 0 ! interface Serial1/2 no ip address shutdown serial restart-delay 0 ! interface Serial1/3 no ip address shutdown serial restart-delay 0 ! router ospf 1 router-id 150.1.3.3 log-adjacency-changes redistribute rip subnets network 141.1.123.3 0.0.0.0 area 0 network 150.1.3.3 0.0.0.0 area 0 ! router rip version 2 redistribute ospf 1 metric 1 passive-interface default no passive-interface Ethernet0/0 no passive-interface Ethernet0/1 network 141.1.0.0 no auto-summary ! ip http server ip forward-protocol nd ! ! ip pim autorp listener ip pim spt-threshold infinity ! ! ! ! control-plane ! ! ! ! ! ! ! ! ! line con 0 exec-timeout 0 0 privilege level 15 logging synchronous line aux 0 exec-timeout 0 0 privilege level 15 line vty 0 4 password cisco login ! ! end
Rack1R3#sh ip pim nei PIM Neighbor Table Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, S - State Refresh Capable Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode 141.1.37.7 Ethernet0/0 00:55:31/00:01:26 v2 1 / DR S 141.1.123.2 Serial1/0.1 00:55:23/00:01:24 v2 100/ S Rack1R3#sh ip pim rp map PIM Group-to-RP Mappings
Group(s) 225.0.0.0/8 RP 150.1.2.2 (?), v2v1 Info source: 141.1.0.8 (?), elected via Auto-RP Uptime: 00:53:14, expires: 00:02:24 Group(s) 239.0.0.0/8 RP 150.1.5.5 (?), v2v1 Info source: 141.1.0.8 (?), elected via Auto-RP Uptime: 00:53:14, expires: 00:02:22
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of George Goglidze Sent: Wednesday, December 26, 2007 1:17 PM To: steveaggie@gmail.com Cc: ccielab@groupstudy.com Subject: Re: IEWB Lab 4 Task 5.3
Hi There,
Paste all the configs , it will be easier to diagnose the problem…
And along with the configs, paste me following command outputs from all routers: #sh ip pim neighbor #sh ip pim rp map
Regards,
On Dec 26, 2007 8:10 PM, wrote:
> Sorry, I forgot to say that I have “ip autorp listener” enabled on all of > the routers and R2 is the RP. > > > > *From:* George Goglidze [mailto:goglidze@gmail.com] > *Sent:* Wednesday, December 26, 2007 1:08 PM > *To:* steveaggie@gmail.com > *Subject:* Re: IEWB Lab 4 Task 5.3 > > > > Hi There, > > You’ve got sparse-mode PIM enabled, and I did not see any RP’s. > Sparse-mode does not work without RP. > > Regards, > > On Dec 26, 2007 7:18 PM, wrote: > > Can someone help me understand why multicast is not working correctly on > the > following network: > > > > R1——R2—–R3 > > > > -Frame Relay hub and spoke. R2 is the hub. > > -R1 & R3 connect using P2P sub-interfaces (s1/0.1) > > -R2 uses the physical interface (s1/0) > > -R3 has a static IGMP join to 225.25.25.25 on its e0/0 interface > > -I try to ping 225.25.25.25 from the e0/0 interface on R1 > > -A few replies are received and then nothing > > -From the debugs it appears R3 is trying to join the SPT to R1 and for > some > reason R2 sends R3 a Register-Stop message. > > > > R1: > > interface Serial1/0.1 point-to-point > > ip address 141.1.123.1 255.255.255.0 > > ip pim sparse-mode > > ip ospf network non-broadcast > > ip ospf priority 0 > > frame-relay interface-dlci 102 > > > > R2: > > interface Serial1/0 > > ip address 141.1.123.2 255.255.255.0 > > ip pim dr-priority 100 > > ip pim nbma-mode > > ip pim sparse-mode > > encapsulation frame-relay > > serial restart-delay 0 > > frame-relay map ip 141.1.123.1 201 broadcast > > frame-relay map ip 141.1.123.3 203 broadcast > > no frame-relay inverse-arp > > frame-relay lmi-type ansi > > > > R3: > > interface Serial1/0.1 point-to-point > > ip address 141.1.123.3 255.255.255.0 > > ip pim sparse-mode > > ip ospf network non-broadcast > > ip ospf priority 0 > > frame-relay interface-dlci 302 > > > > Debugs from R3: > > Rack1R3# > > *Mar 1 03:49:12.219: PIM(0): Insert (141.1.123.1, 225.25.25.25) sgr prune > in > nbr 141.1.123.2’s queue > > *Mar 1 03:49:12.223: PIM(0): Send v2 Register to 150.1.2.2 for > 141.1.123.1, > group 225.25.25.25 > > *Mar 1 03:49:12.235: PIM(0): Insert ( 192.10.1.1,225.25.25.25) join in > nbr > 141.1.123.2’s queue > > *Mar 1 03:49:12.243: PIM(0): Building Join/Prune packet for nbr > 141.1.123.2 > > *Mar 1 03:49:12.247: PIM(0): Adding v2 (192.10.1.1/32, 225.25.25.25), > S-bit > Join > > *Mar 1 03:49:12.251: PIM(0): Adding v2 (141.1.123.1/32, 225.25.25.25), > RPT-bit, S-bit Prune > > *Mar 1 03:49:12.255: PIM(0): Send v2 join/prune to 141.1.123.2 > (Serial1/0.1) > > Rack1R3# > > *Mar 1 03:49:12.271: PIM(0): Received v2 Register-Stop on Serial1/0.1 > from > 150.1.2.2 > > *Mar 1 03:49:12.271: PIM(0): for source 141.1.123.1, group 225.25.25.25 > > *Mar 1 03:49:12.275: PIM(0): Clear Registering flag to 150.1.2.2 for > (141.1.123.1/32, 225.25.25.25) > > Rack1R3# > > *Mar 1 03:49:15.639: PIM(0): Received v2 Join/Prune on Ethernet0/0 from > 141.1.37.7, to us > > *Mar 1 03:49:15.643: PIM(0): Join-list: ( 141.1.123.1/32, 225.25.25.25), > S-bit set > > *Mar 1 03:49:15.647: PIM(0): Update Ethernet0/0/141.1.37.7 to (141.1.123.1 > , > 225.25.25.25), Forward state, by PIM SG Join > > *Mar 1 03:49:15.651: PIM(0): Join-list: (192.10.1.1/32 , 225.25.25.25), > S-bit set > > *Mar 1 03:49:15.655: PIM(0): Update Ethernet0/0/141.1.37.7 to (192.10.1.1 > , > 225.25.25.25), Forward state, by PIM SG Join > > Rack1R3# > > *Mar 1 03:49:19.691: PIM(0): Building Periodic (*,G) Join / (S,G,RP-bit) > Prune message for 225.25.25.25 > > *Mar 1 03:49:19.695: PIM(0): Insert (*,225.25.25.25) join in nbr > 141.1.123.2’s queue > > *Mar 1 03:49: 19.695: PIM(0): Insert (141.1.123.1,225.25.25.25) sgr prune > in > nbr 141.1.123.2 ’s queue > > *Mar 1 03:49:19.703: PIM(0): Building Join/Prune packet for nbr > 141.1.123.2 > > *Mar 1 03:49:19.707: PIM(0): Adding v2 ( 150.1.2.2/32, 225.25.25.25), > WC-bit, RPT-bit, S-bit Join > > *Mar 1 03:49:19.711: PIM(0): Adding v2 (141.1.123.1/32 , 225.25.25.25), > RPT-bit, S-bit Prune > > *Mar 1 03:49:19.715: PIM(0): Send v2 join/prune to 141.1.123.2 > (Serial1/0.1) > >