Go CCIE Go!! - A Cisco Certified Internetwork Expert

Thanks Anderson for your quick response. Does this mean , if active routers fails , the standby router mac-address advertised so that hosts on the segment will have a new mac-address to reach the default gateway?.

On 5/4/08, Anderson Alves wrote: > > Hi Rajakumar, > > I would definitely change the standby mac-address on both routers to use > different mac-address each one of them. > > Example: > > R1: > Int fa0/0 > Standby 1 mac-address 0000.0000.0001 > Standby 1 ip address xx.xx.xx.xx > Standby 1 preempt > > > R2: > Int fa0/0 > Standby 1 mac-address 0000.0000.0002 > Standby 1 ip address xx.xx.xx.xx > Standby 1 preempt > > > On the switches sides, manually configure the new mac-address entries of > the > HSRP. > > > > HTH, > > Anderson Mota Alves > CCIE3 #16778 (R/S, SP and Security) > Technical Instructor > http://www.netmetric-solutions.com > http://www.andersonalves.net > > —–Mensaje original—– > De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de > Rajakumar Ramasamy > Enviado el: Sunday, May 04, 2008 11:45 PM > Para: ccielab@groupstudy.com > Asunto: HSRP + Port Security > > Hello, > > > > I know the following methods to enable port-security on interfaces, which > are connected to routers where HSRP is configured. > > > > Options 1: > > > > switchport port-security > > switchport port-security maximum 2 > > > > > > Option 2 > > > > Standby use-bia > > > > switchport port-security > > switchport port-security maximum 1 > > > > However instead of using the above options, I am trying the following > since > my requirement is to retain the mac addresses when a switch reloads. I get > duplicate mac-address error message on the switch interface where Passive > router is connected. > > > > > > SW1 > > switchport port-security > > switchport port-security maximum 2 > > switchport port-security mac-address > > switchport port-security mac-address > > > > SW2 > > > > switchport port-security > > switchport port-security maximum 2 > > switchport port-security mac-address > > switchport port-security mac-address > > > > > > Duplicate mac-address found error message. How to resolve the above > issue? > > > > Thanks > > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html