Go CCIE Go!! - A Cisco Certified Internetwork Expert

Yes, in different groups, but I dont know that is better all in one group. I want to monitor any interface of router. In each group I apply a track command to monitor all interface except itself.
?Do you know if this work fine???
Regards.
Razl.
On Tue, May 20, 2008 at 1:58 PM, lei tian wrote:
> Didnt see your backup configuration, what you have here only 4 active > routers in different group. > > On Tue, May 20, 2008 at 7:10 AM, Razl Morata Calvo > wrote: > >> Hi friends, >> >> >> I4m implementing HSRP solution between Cisco 3845 and Cisco 3745. Both >> >> routers are connected to Catalyst 6500 on differents boards. >> I have differents groups on active-router ( One per Vlan), and differents >> groups on standby router too, but I want to monitor all interfaces on >> router >> with HSRP, otherwhise, If one interface of HSRP group goes down, I want >> that >> backup router starts active. >> >> Do you know if I can apply this config and will work fine?? >> >> interface GigabitEthernet0/0 >> >> ip address 10.133.1.2 255.255.0.0 >> >> duplex auto >> >> speed auto >> >> media-type rj45 >> >> standby 4 ip 10.133.1.1 >> >> standby 4 priority 105 >> >> standby 4 preempt >> >> standby 4 track giga0/1 >> >> standby 4 track vlan12 >> >> standby 4 track vlan14 >> >> >> >> interface GigabitEthernet0/1 >> >> ip address 192.168.1.5 255.255.255.0 >> >> duplex auto >> >> speed auto >> >> media-type rj45 >> >> standby 7 ip 192.168.1.4 >> >> standby 7 priority 105 >> >> standby 7 preempt >> >> standby 7 track giga0/0 >> >> standby 7 track vlan12 >> >> standby 7 track vlan14 >> >> >> >> interface Vlan12 >> >> ip address 10.100.42.5 255.255.255.248 >> >> standby 15 ip 10.100.42.1 >> >> standby 15 priority 105 >> >> standby 15 preempt >> >> standby 15 name grupo15 >> >> standby 15 track giga0/0 >> >> standby 15 track giga0/1 >> >> standby 15 track vlan14 >> >> crypto map DELEG redundancy >> >> ! >> >> interface Vlan14 >> >> ip address 10.100.56.5 255.255.255.248 >> >> standby 16 ip 10.100.56.1 >> >> standby 16 priority 105 >> >> standby 16 preempt >> >> standby 16 name grupo16 >> >> standby 16 track giga0/0 >> >> standby 16 track giga0/1 >> >> standby 16 track vlan12 >> >> crypto map DELEG-3 redundancy grupo16 >> >> These commands are identical on backup router. >> >> Thanks a lot. >> >> >> _______________________________________________________________________ >> Subscription information may be found at: >> http://www.groupstudy.com/list/CCIELab.html >> >> >> >> >> >
— Razl Morata Calvo Network Consultant Mobile +34 609459635 Mail: raul.morata@gmail.com