.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
Having a bad moment with BGP / IGP
Hi,
This may sound like a stupid question, but I have been studying now for 5 days solid so my brain may be fried..
I seem to have lost grip on BGP and how it interacts with IGP.
I have a set of routes in by BGP table , for which the next hop is known and pingable by my IGP on the same router. When I try and ping the BGP routes I get timeouts from an intermediate IGP router because it doesn’t know the route to my BGP destination. It does however know the route to the BGP next hop.
If I put a static default route out to my BGP Backbone router in this intermediate IGP router I get a ping, but this isn’t correct or practical..
Have tried all the usual next-hop-self tricks but this just changes the BGP next hop to another IGP address which is also accessible through my IGP and I get the same timeout.
Have also advertised my LO0 networks in BGP and run an extended ping from my LO0 as source, makes no difference.
I am definitely missing something here.
Where am I going wrong people!
Thanks in advance
Kriz
