.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
Frame-relay trafic shaping
FRTS question folks,
Q1. in QoS class-map statement, if we have to reserve 20% bandwidth - will that be calculated from Frame-relay CIR???? (CIR=95% of BW). I am not sure….
Q2. Also if we have to allocate 20% bandwidth for signaling traffic - will that be calculated from CIR? or Total Bandwidth?
can someone shed some light on this please….
Frog
interface Serial6/0 description Parent FR Link for BRANCH#60 no ip address encapsulation frame-relay frame-relay traffic-shaping !
interface Serial6/0.60 point-to-point description FR Sub-Interface for BRANCH#60 bandwidth 256
frame-relay interface-dlci 60 ppp Virtual-Template60 ! Enables MLPoFR class FRTS-256kbps ! Binds the map-class to the FR DLCI
! interface Virtual-Template60 bandwidth 256 ip address 10.200.60.2 255.255.255.252 service-policy output WAN-EDGE ! Attaches MQC policy to map-class ppp multilink ppp multilink fragment-delay 10 ! Enables MLP fragmentation ppp multilink interleave ! Enables MLP interleaving ! ! map-class frame-relay FRTS-256kbps frame-relay cir 243200 ! CIR is set to 95% of FR DLCI rate frame-relay bc 2432 ! Bc is set to CIR/100 frame-relay be 0 ! Be is set to 0 frame-relay mincir 243200 ! MinCIR is set to CIR
