.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
frame relay shaping
The task said throughput is 256k anything above 64k will have the de bit set during “congestion”. I don’t think that makes the cir 64k. I think it makes 64k the mincir and that when the interface recieves BECN’s it will shape it down to 64k otherwise it will run at 256k. That means there is no be —– Original Message —– From: “Sadiq Yakasai” To: “Rich Collins” Cc: “akyccie” ; “Cisco certification” Sent: Wednesday, May 28, 2008 8:51 AM Subject: Re: frame relay shaping
>I would do this with these parameters: > > map-class frame-relay SHAPE > frame-relay cir 64000 > frame-relay mincir 32000 (by default) > frame-relay bc 8000 (Bc = Tc * cir –> 0.125 * 64000 ) > frame-relay be 24000 [(air - cir) * Tc] –> [(256000-64000) * 0.125] > frame-relay adaptive-shaping becn > ! > int s1/0 > frame-relay traffic-shaping > frame-relay class SHAPE > > HTH > Sadiq > > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
