.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
Etherchannel load-balance
Etherchannel load balances by default, but how does it load balance. I can’t remember how so you’ll have to look it up and then you’ll know.
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swethchl.html —– Original Message —– From: “Cisco Addicted” To: Sent: Friday, July 04, 2008 9:49 AM Subject: Etherchannel load-balance
> Dears, > > I want to know what is to consider when deciding the ether channel load > balancing if I may have the following scenario: > > > > > > VLANA-(Fa0/0–R1–Fa0/1)—— SW1 (3560)=== ===SW2 (3560) > ——(fa0/1-R2—-fa0/0) —– VLAN C > > > > And considering there is a many users in VLAN-A accessing server on > VLAN-C, > and there is etherchannel trunk configured between SW1 & SW2. > > > > Thanks in advance. > > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
