.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
DSCP
IMHO, I think the IOS coder assume that we already know that DSCP and precedence bits are in IP header. So, just by typing set dscp or set precedence keyword, it will be assumed set ip dscp or set ip precedence. both ways are the same. Rgds, Thomwin Bill.McKenzie@bisys.com wrote: The set dscp command is the replacement for the set ip dscp command which is being phased out.
—– Original Message —– From: Sami [sy1977@gmail.com] Sent: 07/01/2006 05:50 AM To: CSB Cc: “Cisco certification” Subject: Re: DSCP
Group,
What is the diffrence between
set dscp ef and set ip dscp ef
Thanks
On 7/1/06, CSB wrote: > > I think it could be counted as bulk and/or scavenger application. > > DSCP=CS1=COS1 or AF11=COS1 > > > —– Original Message —– > From: “Sami” > To: “Cisco certification” > Sent: Friday, June 30, 2006 2:45 PM > Subject: DSCP > > > > Group, > > > > Genrally we assign ef dscp vlaue to voice traffic. what is the dscp > value > > most commanly used for http traffic. > > Task just say assign a dscp value so that traffic is least likely to be > > dropped.. > > > > I am thinking of af33..which is below ef. > > > > Thanks > > > > _______________________________________________________________________ > > Subscription information may be found at: > > http://www.groupstudy.com/list/CCIELab.html
