.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
DE Marking with MIN CIR
Mincir is for traffic shaping (YOUR point of view)
DE is done by the SP/switch CIR rate (SP’s point of view)
You can pre-mark things as DE to make traffic not count against CIR for SP, but that’s all them and not your view. 
HTH,
Scott Morris, CCIE4 #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al. CCSI/JNCI-M/JNCI-ER Senior CCIE Instructor
smorris@internetworkexpert.com
Knowledge is power. Power corrupts. Study hard and be Eeeeviiiil……
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of shank shank Sent: Sunday, November 30, 2008 5:18 PM To: CCIE Group Subject: DE Marking with MIN CIR
hello experts, i was working on some labs with fram realy taks and i came across a task that asks for setting the DE bit. the solution was through MQC but i was wondering isn’t that done by default when we use the Cir and the mincir command in the frame relay traffic shaping. i’m just thinking of an alternative solution. can anybody confirm to me if it could be done any other way than MQC?
Blogs and organic groups at http://www.ccie.net
