.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
Clients can’t be assigned IP address with DHCP relay
Hi, I think it is a simple question, but I just can’t figure out what wrong with it. Here in this scenario r3(e0/0 dhcp)-(e0/0 192.168.234.2)r2(s0/0)192.168.12.0/24(s0/0)r1 based on the following configuration, why can’t r3’s interface be assigned an IP address with DHCP R1#show running-config ip dhcp excluded-address 192.168.234.2
ip dhcp pool 234 network 192.168.234.0 255.255.255.0 default-router 192.168.234.2 domain-name cisco.com interface Serial0/0 ip address 192.168.12.1 255.255.255.0 no fair-queue
R2#show running-config interface Ethernet0/0 ip address 192.168.234.2 255.255.255.0 ip helper-address 192.168.12.2 half-duplex ! interface Serial0/0 ip address 192.168.12.2 255.255.255.0 clock rate 64000 no fair-queue R3#show running-config interface Ethernet0/0 ip address dhcp half-duplex end
Many thanks!
Blogs and organic groups at http://www.ccie.net
