Go CCIE Go!! - A Cisco Certified Internetwork Expert

Hello Jennifer, Please post the config on both sides. Sincerely, John
On 8/31/08, jenifer Dcosta wrote: > Hi Experts, > > > c3500XL-c3h2s-mz-120.5.2-XU.bin–the ios image and it is a C3500XL-48 port > switch .The Gbic module what i have connected is from from cisco not any > third party.The link was working before but automatically i when to c it is > orange i swap the Gbic and also the cables but the protocol is down and the > light is orange.Is it Hardware failure on the Gbic ports inside the switch?. > > Also it is not giving me any errors @ startup. > > Sorry guys to reply late. > > Thanks, > Jenifer > > > > On Sat, Aug 30, 2008 at 9:54 PM, wrote: > >> You might also check to see if the interface is in err-disabled status >> Sent from my BlackBerry(R) wireless device >> >> —–Original Message—– >> From: “Tony Schaffran (GS)” >> >> Date: Sat, 30 Aug 2008 09:52:30 >> To: ‘jenifer Dcosta’; ‘Cisco certification’> ccielab@groupstudy.com> >> Subject: RE: can anybody help >> >> >> What is the model of switch and IOS version? >> >> Has this GBIC link worked before or is this a new connection? >> >> Have you tried to swap the fiber connections on one end? >> >> >> Tony Schaffran >> Sr. Network Consultant >> CCIE #11071 >> CCNP, CCNA, CCDA, >> NNCDS, NNCSS, CNE, MCSE >> >> www.cconlinelabs.com >> Your #1 choice for online Cisco rack rentals. >> >> >> —–Original Message—– >> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of >> jenifer Dcosta >> Sent: Saturday, August 30, 2008 7:44 AM >> To: Cisco certification >> Subject: can anybody help >> >> Hi Experts, >> >> I m facing 1 issue with 1 of my access switches,my switch uplink ports are >> gibic modules and i m not able to connect >> >> to the core.i have changed the gbic modules but still it does’nt work and >> also the fibre cable too.One of the strange thing is that when i remove >> >> gbic module still the led glows orange and when i insert it again still it >> remains same .Interface is up but the line protocol is down always. >> >> Have any body face this issue before i have done the default interface >> also >> but still it doesnt come up.I dont understand when there is no gbic moduls >> inserted still the light glows orange >> >> And when i m inserting in the next Gbic port the light doesnt even glows >> nor >> orange nor green.it seems like the module is not inserted.Trunk >> configurations are correct and also negotiations are also correct >> >> >> Blogs and organic groups at http://www.ccie.net >> >> _______________________________________________________________________ >> Subscription information may be found at: >> http://www.groupstudy.com/list/CCIELab.html >> >> >> Blogs and organic groups at http://www.ccie.net >> >> _______________________________________________________________________ >> Subscription information may be found at: >> http://www.groupstudy.com/list/CCIELab.html > > > Blogs and organic groups at http://www.ccie.net > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net