Go CCIE Go!! - A Cisco Certified Internetwork Expert

Just make sure that the two route-reflector’s have a bgp session between them. You can lose routes if you don’t have it there plus I would actually make the bgp cluster id different per the BGP design and Implementation Cisco Press book.
Thanks, Jason Smith CCIE #12097
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Christian Thomsen Sent: Tuesday, December 11, 2007 10:27 AM To: Cisco certification Subject: Configuring: BGP Cluster
Hi Team,
I configured a bgp cluster with two BGP route-relectors and two clients. Both route-reflectors see the clients and running the same cluster-id.
The univercd reference to use for verifying the cluster-id. In my lab on one route-reflector is reported with the cluster-id on the clients.
Any additional configuration required on the route-reflectors?
RRclient#sho ip bgp 0.0.0.0 BGP routing table entry for 0.0.0.0/0, version 335 Paths: (2 available, best #2, table Default-IP-Routing-Table) Multipath: eBGP Not advertised to any peer 2011 11.11.67.6 (metric 2) from 11.11.8.8 (11.11.8.8) Origin IGP, metric 0, localpref 100, valid, internal Originator: 11.11.7.7, Cluster list: 11.11.11.11 2011 11.11.67.6 (metric 2) from 11.11.7.7 (11.11.7.7) Origin IGP, metric 0, localpref 100, valid, internal, best
Looking forward to your feedback
Christian

Jetzt neu! Sch|tzen Sie Ihren PC mit McAfee und WEB.DE. 3 Monate kostenlos testen. *http://www.pc-sicherheit.web.de/startseite/?mc=022220* [http://www.pc-sicherheit.web.de/startseite/?mc=022220]