Basic privilege issue

January 4, 2008 @ 3:09 pm · Filed under CCIE Study

Emil, look at the document I referred to you. The difference is mentioned there.
On Jan 4, 2008 9:29 PM, YourPal wrote:
> Hi Brian, > > In my case he can do “sh run” but sees a blank config because there are no > config commands available at privilege level 7 or below. > > I’m a bit confused with privilege levels 0 and 1. Aren’t both referring to > Router> prompt? > > > Thank you. > > BR, > Emil > > > On 1/5/08, Brian Dennis wrote: > > > > The user is seeing all level 7 configuration commands > > > > Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP) > > bdennis@internetworkexpert.com > > > > Internetwork Expert, Inc. > > http://www.InternetworkExpert.com > > Toll Free: 877-224-8987 > > Direct: 775-745-6404 (Outside the US and Canada) > > > > > > >—– Original Message —– > > Subject: Basic privilege issue > > Date: Fri, January 4, 2008 7:43 > > From: “YourPal” > > > > > Hi Group, > > > > > > I have a basic problem but can’t seem to figure out why. Hope someone > > > can explain it to me. Router config as follows: > > > ! > > > username test privilege 7 password 0 test > > > ! > > > privilege exec level 7 show running-config > > > ! > > > line vty 0 4 > > > login local > > > ! > > > > > > When user “test” telnets in and issues the command “sh run”, he sees a > > blank > > > config. Why is it so? I’d like him to be able to view the config. > > > > > > > > > Thank you. > > > > > > BR, > > > Emil > > > > > > > _______________________________________________________________________ > > > Subscription information may be found at: > > > http://www.groupstudy.com/list/CCIELab.html > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html