Go CCIE Go!! - A Cisco Certified Internetwork Expert

End to End keepalives.
map-class frame-relay Framecloud frame-relay end-to-end keepalive bidirectional frame-relay end-to-end keepalive timer send 15 frame-relay end-to-end keepalive timer receive 15
int s0/0.1 frame-relay interface-dlci 16 frame-relay class Framecloud

—–Original Message—– >From: Godswill Oletu >Sent: Jun 7, 2006 8:32 PM >To: ELDHO PAUL , ccielab@groupstudy.com >Subject: Re: Advanced Frame-Relay Features > >hmmmmmm…. > >The only thing that will come close is…. > >IP SLA or RTR on R6 & R8, poll the other router’s ip address every 15 >seconds, and then use MD5 authentication for the IP SLA monitor control >message: > >Something like…. > >! >ip sla monitor key-chain SLA >ip sla monitor 1 > type echo protocol ipIcmpEcho 1.1.1.2 > frequency 15 >! >ip sla monitor schedule 1 start-time now life forever >! >key chain SLA > key 1 > key-string CISCO >! >! > >HTH >Godswill Oletu > >—– Original Message —– >From: “ELDHO PAUL” >To: >Sent: Wednesday, June 07, 2006 2:01 PM >Subject: Advanced Frame-Relay Features > > >> Hi, >> >> While doing a CCIE scinario on frame-relay configuration I came across a >> question which says, >> ** >> *”Enable the R6-R8 frame connection to operate under the following >> conditions: >> >> - Support for 128-bit MD5 authentication. >> >> - R6 and R8 are to poll each other every 15 seconds to ascertain the other >> side’s ability to transmit into the frame cloud.”* >> ** >> Can anyone advice me how to do it. >> >> Regards, >> Eldho. >> >> _______________________________________________________________________ >> Subscription information may be found at: >> http://www.groupstudy.com/list/CCIELab.html > >_______________________________________________________________________ >Subscription information may be found at: >http://www.groupstudy.com/list/CCIELab.html