Go CCIE Go!! - A Cisco Certified Internetwork Expert

hmmmmmm….
The only thing that will come close is….
IP SLA or RTR on R6 & R8, poll the other router’s ip address every 15 seconds, and then use MD5 authentication for the IP SLA monitor control message:
Something like….
! ip sla monitor key-chain SLA ip sla monitor 1 type echo protocol ipIcmpEcho 1.1.1.2 frequency 15 ! ip sla monitor schedule 1 start-time now life forever ! key chain SLA key 1 key-string CISCO ! !
HTH Godswill Oletu
—– Original Message —– From: “ELDHO PAUL” To: Sent: Wednesday, June 07, 2006 2:01 PM Subject: Advanced Frame-Relay Features
> Hi, > > While doing a CCIE scinario on frame-relay configuration I came across a > question which says, > ** > *”Enable the R6-R8 frame connection to operate under the following > conditions: > > - Support for 128-bit MD5 authentication. > > - R6 and R8 are to poll each other every 15 seconds to ascertain the other > side’s ability to transmit into the frame cloud.”* > ** > Can anyone advice me how to do it. > > Regards, > Eldho. > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html