.jpg "Opportunities, Appliacation, Openings"){kind=small}
.jpg "Hand Job, Blow Job, Job Search, Monster Job"){kind=small}
.jpg "pusat resume, daftar kerja, cari kerja"){kind=small}
.jpg "Project Manager, SOftware Engineer, SAP Consultant"){kind=small}
6500 QOS
Dear Experts,
Can any body share with me a working QOS config of a 6500 switch or the auto generated commands in autoqos or point me towards a link Below are details of the switch
*SUP - 720 running IOS 12.2(18)SXF14*
This IOS version does not support autoqos
*Line Card * sh interfaces gigabitEthernet 2/1 capabilities GigabitEthernet2/1 Dot1x: yes Model: WS-X6724-SFP Type: 1000BaseLH Speed: 1000 Duplex: full Trunk encap. type: 802.1Q,ISL Trunk mode: on,off,desirable,nonegotiate Channel: yes Broadcast suppression: percentage(0-100) Flowcontrol: rx-(off,on,desired),tx-(off,on,desired) Membership: static Fast Start: yes QOS scheduling: rx-(1q8t), tx-(1p3q8t) CoS rewrite: yes ToS rewrite: yes Inline power: no SPAN: source/destination UDLD yes Link Debounce: yes Link Debounce Time: yes Ports on ASIC: 1-12 Port-Security: yes
Regards
Blogs and organic groups at http://www.ccie.net
