Go CCIE Go!! - A Cisco Certified Internetwork Expert

Have you checked IE’s Blog? They have a great reference for quick ways to determine this.
http://blog.internetworkexpert.com/2007/12/26/q-how-do-i-compute-complex-wil dcard-masks-for-access-lists/
Thanks Chris
On 3/30/08 4:44 PM, “ccietester55 ccietester55″ wrote:
> Hi all. > > After doing a number of practice labs I’ve found one of my weak areas > is the complex subnetting and wildcard masking tasks. I […]

Multicast Command reference 12.4 has the correct configuration for IP multicast helper-map
On Mon, Mar 31, 2008 at 9:46 PM, Murphy, William wrote:
> As I recall the command is only required on the interface where the > broadcast is “exploded” into a link-layer broadcast… > > Bill Murphy > Senior Network Analyst > University of […]

As I recall the command is only required on the interface where the broadcast is “exploded” into a link-layer broadcast…
Bill Murphy Senior Network Analyst University of Texas Health Science Center - Houston 6901 Bertner, Suite 432 Houston, TX 77030
Office: (713) 500-9947 Fax: (713) 500-0272 Mobile: (832) 594-0136
—–Original Message—– From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] […]

Gents,
Some significant study time has opened up for me evenings UK time over the course of the next 10 weeks. Primarily working with IPexpert workbook 9 I would be happy to keep in touch offline with a few study partners. Users of other workbooks welcome. Should do a few mock exams during the period as […]

Well, Bob’s your uncle man.

Hi,
This error is normal when you enable PIM on an Ethernet Interface without enabling it on an adjacent interface in the same VLAN/Subnet.
You can safely ignore.
Joseph.
On Mon, Mar 31, 2008 at 8:42 PM, Uyota Oyearone wrote:
> m routing is enabled on sw3. > > > On Mon, Mar 31, 2008 at 12:38 PM, […]

m routing is enabled on sw3.
On Mon, Mar 31, 2008 at 12:38 PM, Sadiq Yakasai wrote:
> Hi, > > Can you check if MCAST enabled on SW3?

Hi,
Can you check if MCAST enabled on SW3?

Hi Paul,
Its a basic Multicast scenerio. r2, r3 & r5 are multicast routers.
r2(s1/0)(s1/0)r3(s1/1)s(1/0)
r2 fa0/0 connects to SW2(ip routing enabled) r5 e0/1 connects to SW3(ip routing enabled) — R5#sh ip pim nei PIM Neighbor Table 150.1.0.3 Serial1/0 […]

i am sorry , you are right :p
On 3/31/08, Ramanpreet Singh wrote: > > i think you meant 3,4 and 6th? right? > > On 3/30/08, Shine Joseph wrote: > > > > Mike, > > > > > > > > No. you can ahave any value from 0 to 255 for […]